How to Apply Dexpel Skin

How to apply a laptop / console skin
A simple how-to instruction photo series on how to apply a laptop/console/tablet skin sticker to your gadget.
step 1: Make sure your device is clean. Wipe it off with a soft cloth. The device should be free of dust, fat and grease - otherwise the skin may not stick to your gadget as well as it's supposed to.
step 2: Place it perfectly in alignment as you want it on the laptop. You wont have to cut the skin if you provided us the right dimensions, as we manufacture on the exact dimensions that you give us. There can be max +/- 0.1-0.2cm tolerance.
step 3: One you are happy the placement, take two pieces of normal scotch tape and paste the two sides to hold the skin in place
step 4: Now lift the skin from one direction and cut off about 1-1.5 inches of the backing paper. You will have the sticky part uncovered now. Gently paste that part of the skin, once you are happy with the application remove the tapes.
step 5: Now lift the skin from the other side, and from underneath peel off the backing paper. and from top use a card or your right hand to paste the skin with pressure from top.
step 6: Slowly remove keep removing the backing paper paste the skin inch by inch all the way and before you know you're done, that was easy - and the result will be stunning
 
 
Will I be able to remove it again?
Ans: Our skins come off without any problem! Even if it is solidly stuck on, you can remove the skin in just 1 minute. There is no residue whatsoever. Our skins are 100% safe for your laptop.

How to apply a phone/small gadget skin
A simple how-to instruction photo series on how to apply a phone/small gadget skin sticker to your device.
step 1: Make sure your device is clean. Wipe it off with a soft cloth. The gadget should be free of dust, fat and grease - otherwise the skin may not stick to your device as well as it's supposed to.
step 2: Place it perfectly in alignment as you want it on the device. You wont have to cut the skin at all as its perfectly cut for you already, and is made exactly for your device.
step 3: One you are sure that your skin is perfect, hold it in your hands and cut off an inch of the backing paper and paste that perfectly aligning the top of the skin to the top of the device.
step 4: Now lift the skin from the other side, and from underneath peel off the backing paper. and from top use your fingers/thumbs to paste the skin with pressure from top.
step 5: Slowly remove keep removing the backing paper paste the skin inch by inch all the way and before you know you're done, that was easy - and the result will be stunning.